Trailing Arm Bushing: Service and Repair

TRAILING ARM BUSHING REPLACEMENT
Required Special Tools:
^ MB991444: Bushing Remover and Installer Arbor
^ MB991445: Bushing Remover and Installer Base





1. Use the special tools MB991444 and MB991445 to drive out the trailing arm bushing.





2. Set the installation direction and installation location of the trailing arm bushing.
1. Place the long projection end of the trailing arm bushing inner pipe towards the inside of the vehicle.
2. Make sure that the hollow of the trailing arm bushing is located as shown in the illustration.





3. Using the special tools MB991444 and MB991445, press the trailing arm bushing into the position shown.