Removal and Installation

HEATER UNIT, HEATER CORE, BLOWER ASSEMBLY AND EVAPORATOR UNIT

Pre-removal & Post-installation Operation:

Removal Steps 1-11:

REMOVAL AND INSTALLATION

WARNING: When removing and installing the heater unit, do not let it bump against the SRS-ECU or the components.

REMOVAL SERVICE POINT

<> FLEXIBLE SUCTION HOSE AND LIQUID. PIPE B DISCONNECTION

CAUTION: As the compressor oil and receiver are highly moisture absorbent, use a non-porous material to plug the hose and nipples.

To prevent the entry of dust or other foreign bodies, plug the dismantled hose and the nipples of the expansion valves.